When replacing the distributor, the cheap manual says to check "Cam Retard" for +2/-2 to set the base timing. I am looking for the OBD2 command to read and display that value (and what is the conversion if any)???
Thanks
Scot
When replacing the distributor, the cheap manual says to check "Cam Retard" for +2/-2 to set the base timing. I am looking for the OBD2 command to read and display that value (and what is the conversion if any)???
Thanks
Scot
this is what i requested to be added to the scanner, a correlation checker so you can set the distributor....same problem with my 98 4.3
I emailed tech support, I'm just very surprised that in 7 years this hasn't been addressed?
I'm running into the same thing on a 98 5.7. Wondering if if the "Cam Offset %" is perhaps the PID we need to use, however I have not been able prove/disprove this yet. Any thoughts on this, or am I gonna have to go borrow a Snap-On to set my timing?
I must be shorter than I think, because it seems I am CONSTANTLY get'n in over my head!
Builds:
55 Bel Air Sedan - 5.3, 4L60, 3.73 Posi
72 K5 Blazer - 5.3, 4L60, Passenger Drop 241C
85 K10 Truck - 98-Vortec 350, 4L60, Passenger Drop 241C
Coming Soon : 68 Chevelle Convertible to get 5.3/4L60
Pics will be available IF I ever get around to it!!!
Any chance this can be added? Need to set timing on a 98 vortec 7.4 motor after replacing the distributor...