Tuner in Training
need help new cam
just installed new cam need help tuneng
Lobe Separation 109
Duration 291 311
silverado.hpt
silverado.hpt
Tuner in Training
I am new to tuneing im ready to pull my hair out
Senior Tuner
You put a big motha' thumpr in a stock compression 4.8? How big is the converter? Please tell me this is not your daily........
Senior Tuner
try this. If it will start and idle let it get to operating temperature then post an idle log using default imperial about 1 min long.
Tuner in Training
yes its my every day driver
ive put togather much bigger cams and motors and drive the hell out of them ive never dun a fuel injected motor
and it got a 2800 stall
Tuner in Training
thanks mecanicman that did help a lot
here is the run data from that tune
Tuner in Training
test data
Attached Files
Tuner in Training
may I ask ware would I start
Senior Tuner
Tuner in Training
Any one in the tampa area or north of there that can help with tune
Potential Tuner
I just did a thumpr cam in my stock compression 6.0 and got it dialed in if need help I can take a look at your file this evening. The 4.8 should be fine and I can share my tune for you to go off of. Pm me.
Tuner in Training
That would be grate thanks
i have a tune now but it seams week
Tuner in Training
Tuner in Training
STILL fells like it needs fuel or timeing
Potential Tuner
What's your email? Or send me message with your email
Tuner in Training
Tuner in Training
Potential Tuner
Tuner in Training
I also cant figure out how to run in rtt
Tuner in Training