Results 1 to 6 of 6

Thread: DataLog Feedback

  1. #1
    Tuner in Training
    Join Date
    Apr 2015
    Posts
    11

    DataLog Feedback

    Hi,

    First of all i am no tuner at all.
    I am a Camaro 2010 SS A6 owner. My car is Magnuson supercharged 3.3 pulley, with stage 1 cam, stage 3 ported heads, headers, air intake, Snow performance methanol kit, and cat-back.

    My tuner says my car is perfect, running well, and that there is no knocking at all.

    However while datalogging yesterday, i found too many knocks reaching nearly 6.

    Kindly can anyone just take a look at the numbers in the link below and tell me if my car is running fine or not?

    https://docs.google.com/spreadsheets...#gid=582873046


    Many thanks in advance!
    Last edited by mwtune; 07-20-2015 at 05:09 AM.

  2. #2
    Senior Tuner mowton's Avatar
    Join Date
    Mar 2007
    Location
    Florida
    Posts
    3,773
    No, its knocking at WOT and pulling timing.....

    can you post up the actual log and tune files. Also, do you have a wideband, because that is the only way you are going to be able to see whats happening at wot.

    Ed M
    2004 Vette Coupe, LS2, MN6, Vararam, ARH/CATs, Ti's, 4:10, Trickflow 215, 30# SVO, Vette Doctors Cam, Fast 90/90, DD McLeod, DTE Brace, Hurst shifter, Bilsteins etc. 480/430

    ERM Performance Tuning -- Interactive Learning ..from tuning software training to custom tunes
    HP Tuners Dealer- VCM Suite (free 2hr training session with purchase), credits and new Version 2.0 turtorial available
    http://www.ermperformancetuning.com
    http://www.facebook.com/ERMPerformanceTuning

    [email protected]

  3. #3
    Tuner in Training
    Join Date
    Apr 2015
    Posts
    11
    Quote Originally Posted by mowton View Post
    No, its knocking at WOT and pulling timing.....

    can you post up the actual log and tune files. Also, do you have a wideband, because that is the only way you are going to be able to see whats happening at wot.

    Ed M
    Thank you for your reply Ed.

    this is the full log https://docs.google.com/spreadsheets...it?usp=sharing

    and i have attached the tune for you.

    I really appreciate your help
    Attached Files Attached Files

  4. #4
    Senior Tuner mowton's Avatar
    Join Date
    Mar 2007
    Location
    Florida
    Posts
    3,773
    Quote Originally Posted by mwtune View Post
    Thank you for your reply Ed.

    this is the full log https://docs.google.com/spreadsheets...it?usp=sharing

    and i have attached the tune for you.

    I really appreciate your help
    The Log s/b an .hpl file. I still dont see a wideband in that data log run though.

    Ed M
    2004 Vette Coupe, LS2, MN6, Vararam, ARH/CATs, Ti's, 4:10, Trickflow 215, 30# SVO, Vette Doctors Cam, Fast 90/90, DD McLeod, DTE Brace, Hurst shifter, Bilsteins etc. 480/430

    ERM Performance Tuning -- Interactive Learning ..from tuning software training to custom tunes
    HP Tuners Dealer- VCM Suite (free 2hr training session with purchase), credits and new Version 2.0 turtorial available
    http://www.ermperformancetuning.com
    http://www.facebook.com/ERMPerformanceTuning

    [email protected]

  5. #5
    Senior Tuner mowton's Avatar
    Join Date
    Mar 2007
    Location
    Florida
    Posts
    3,773
    I can tell you right off the bat that the Power Enrichment table is hosed......1.12 is even low for an Naturally aspirated setup, let alone you SC'r. I would get back to him stat and ask him.

    Again without a wideband can't tell whats going on at WOT but assume it isn't good....

    Ed M
    2004 Vette Coupe, LS2, MN6, Vararam, ARH/CATs, Ti's, 4:10, Trickflow 215, 30# SVO, Vette Doctors Cam, Fast 90/90, DD McLeod, DTE Brace, Hurst shifter, Bilsteins etc. 480/430

    ERM Performance Tuning -- Interactive Learning ..from tuning software training to custom tunes
    HP Tuners Dealer- VCM Suite (free 2hr training session with purchase), credits and new Version 2.0 turtorial available
    http://www.ermperformancetuning.com
    http://www.facebook.com/ERMPerformanceTuning

    [email protected]

  6. #6
    Tuner in Training
    Join Date
    Apr 2015
    Posts
    11
    Many thanks again for ur help, at least now i know what to tell my tuner.

    Quote Originally Posted by mowton View Post
    The Log s/b an .hpl file. I still dont see a wideband in that data log run though.

    Ed M
    Unfortunately i dont have an hp tuner kit myself to datalog. So that's all what i can submit

    Quote Originally Posted by mowton View Post
    I can tell you right off the bat that the Power Enrichment table is hosed......1.12 is even low for an Naturally aspirated setup, let alone you SC'r. I would get back to him stat and ask him.

    Again without a wideband can't tell whats going on at WOT but assume it isn't good....

    Ed M
    Again i appreciate ur feedback. Il get back to him and face him with your comments