So long story short, i've been learning tuning because my first "tuner" was incomptent. I brought my car to a 2nd tuner and my tune is much better but still not perfect. Both MAF tables are ironed out, and the timing table has been massaged very well. SD / VE stuff was not tuned, so ill just configure to use MAF only for now.
I noticed neither tuner changed my injection timing. It's still at stock values. Is there a spreadsheet somewhere to help me dial in the proper values for my injector boundary table? I'll post up my entire cam card if someone can give me some calculation tools or support on ballpark figures.
I have some idle / low RPM surging, but i'm guessing I should tune the injector timing prior before chasing the issue w/ throttle follower edits? Will the MAF curve have to be re-adjusted again after the Injector changes?
2006 ctsv, e67, longtubes + cam. Stock ls2.