Please don't do anymore wot on a cammed car with no wideband tuning done.
Please don't do anymore wot on a cammed car with no wideband tuning done.
Agree strongly. You need a wideband on it or you have no idea what you're actually getting AFR/lambda wiseOriginally Posted by Eaglegoat
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
Yes, don't want to melt a hole in a piston etc. It throws MAF/ MAP codes at idle now, not always, but after a drive, typical big cam idle I assume. It does lope on idle now and is usually ok. I bumped the idle speed up slightly, not sure what to do there. I changed the idle coast down spark(? not sure what it was called, don't have HPT in front of me right here), not sure it helped. Also does not start great.
I don't rape PE tables cause I don't know what I am doing anyway....
Reply With Quote