-
Tuner
Rusty user ... Some parameters not scanning or logging ??
Ok , I have not used my HP Tuners in a while . I have Several Items not Scanning or Recording now .
I have checked my Charts & they are all enabled but show nothing when Scanning or Recording ....where do I go ?
Inj. Duty Cycle , MAF , TPS , K R , Inj. b1& 2 , 02 B 1 & 2 ...
Last time I used my Tuners Everything was Working ...where do need to check or Look ?
-
Tuner
Ok while Searching similar Threads I Unhooked from Diagnostics Port & plugged back up ... now my MAF & TPS is scanning & Logging ????