Results 1 to 9 of 9

Thread: 2005 Ford Excursion V-10 - are these supported?

  1. #1
    Advanced Tuner 68Camaro's Avatar
    Join Date
    Mar 2011
    Location
    Van Buren, AR
    Posts
    326

    2005 Ford Excursion V-10 - are these supported?

    Are these supported?

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Try reading it for starters, if you run into an issue email support.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Advanced Tuner 68Camaro's Avatar
    Join Date
    Mar 2011
    Location
    Van Buren, AR
    Posts
    326
    was hoping for an answer a little more concrete than that before I tell a customer 3 hours away to come and I will "try and tune it - but I'm not really sure this is supported or not by HPtuners"

    That's ok though because I have Tweecer also and can tune it with that if I have too - I just prefer HP

  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    We've mapped out some of their operating systems but with ford there are likely more, best option is to read it and go from there.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #5
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Have the customer send you the PCM catch code and I can tell you for sure if the definition is done.

  6. #6
    There is only one family for that combo (that i'm aware of for MY05)

    BUP0, BUP1, BUP2, BUP3

    4C7A-14C204-DD / The hardware is MTC-422A (which is used on 00-05 6.8 and F series with 6.8)

    Cheers,
    -Matt
    Last edited by ZeroAviation; 05-20-2015 at 01:50 PM.
    There are two ways of constructing a software design: One way is to make it so simple that there are obviously no deficiencies, and the other way is to make it so complicated that there are no obvious deficiencies. The first method is far more difficult.

  7. #7
    Advanced Tuner 68Camaro's Avatar
    Join Date
    Mar 2011
    Location
    Van Buren, AR
    Posts
    326
    We've mapped out some of their operating systems but with ford there are likely more, best option is to read it and go from there.
    ok. Thanks Bill.

    Have the customer send you the PCM catch code and I can tell you for sure if the definition is done.
    Thanks Eric.. where is the PCM catch code?

  8. #8
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by 68Camaro View Post
    ok. Thanks Bill.



    Thanks Eric.. where is the PCM catch code?
    On the PCM itself. Should be a white decal near the PCM connectors. PCM code will be 4 characters, generally 3 letters and a number. Like CDC3
    Eric Brooks
    HP Tuners, LLC

  9. #9
    Potential Tuner
    Join Date
    May 2021
    Posts
    1
    so dose anyone have answer to this yet...i to have 205 ford excursion 6.8 v10 and would like to know ....thanks