Help logging map kpa as well as converting it to psi for boost.

[The Alchemist]

I'm trying to setup my scanner to have a gauge or readout for both kpa as well as psi for boost. It's not a huge deal, as I can always do the calculation myself, but it would be nice for it to be done automatically in the scanner, I'm just struggling figuring it out. I'm already logging the map sensor, I just need to somehow convert it to psi which is essentially map sensor kpa - 100kpa (atmosphere) * 0.145.

Here's my current config file I've been using.

Thanks guys.

[Quoll]

http://www.hptuners.com/help/vcm_sca...ustom_pids.htm

[The Alchemist]

Thanks Quoll. I found that help the other day and forgot about this post.