Results 1 to 2 of 2

Thread: Deatschwerks 65lb injectors

  1. 04-08-2015 #1
    PICNIC_GEORGE
    PICNIC_GEORGE is offline
    Tuner
    Join Date
    Jul 2012
    Posts
    65

    Deatschwerks 65lb injectors

    According to http://www.deatschwerks.com/products...-0065-8-detail these injectors actually flow 72lb @ 3 bar and 86.2 @ 4 bar. Is this correct? Right now the car has the IFR set to 86.2 and fuel pressure is @ 58psi and even with the vacuum line unhooked it is completely lean and adding about 25%. Obviously I would assume an injector rated to 65lbs should be @ 3 bar and IFR should be set to about 75lbs.

    Is this wrong or right?
    Reply With Quote Reply With Quote
  2. 04-08-2015 #2
    PICNIC_GEORGE
    PICNIC_GEORGE is offline
    Tuner
    Join Date
    Jul 2012
    Posts
    65
    The flow sheet that came with the injectors says it flows 737cc @ 3 bar. Guess that works out to about 851cc @ 4bar(closer to 80 lbs).
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »