Gentlemen,
I could really use some of your help. Stuck in a bit of a situation.
I have a 2013 Mustang GT (non track pack) with the following setup:
1. 3.73 gears
2. Stock intake
3. Lowering springs w/ Panhard bar, camber bolts, aligned OK
4. Stock Cats are present, after cats is X pipe, with GT500 mufflers. Stock O2 sensors are also installed.
I cannot for the life of me get the thing to have the O2 and heated O2 sensors to be ready. I have followed the drive cycles every way, set cruise control to 40 mph for a 4 miles, 60 mph on the free way etc. Does anyone have any feedback? I am really in a bind here since inspection is now due.
Edit: Forgot to mention, purchased the car used, had a 93 race tune on it. Put it back on the stock tune, drove for almost 150 miles, still did not clear.
Just got another tune today supposedly to help out with the emissions. So far the same O2 and Heated O2 sensors are not ready
Thanks in advance for the help!