Results 1 to 3 of 3

Thread: 2010 Tuned

  1. #1
    Tuner in Training
    Join Date
    Dec 2013
    Location
    Burkburnett, Texas
    Posts
    28

    2010 Tuned

    What are peoples thoughts about this tune I made for a friend? Hints would be appreciated!!Tuned.hpt

    2010 5.3 silverado

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    Looks alright. I assume a stock truck here.

    Try these knock sensor tables and the burst knock table. I just prefer them this way. Also a trans tune does wonders. I've only changed the shift times and pressures but thats enough to make it feel better. Only look at the shift time torque adder upshift normal and upshift special for times, some other minor stuff is different between builds. Like if it's a late or early 2010, as 2011 got some minor year to year changes. The truck is running 275/55/20's, so some stuff you will not want to change.

    Also be warned that going above 100mph on a stock driveshaft is not a good idea, they are known to vibrate and explode if aluminum.2010 Silverado + Engine and Trans,Tire2.hpt
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Advanced Tuner Road's Avatar
    Join Date
    Dec 2014
    Location
    Terrell Tx
    Posts
    478
    Tune looks good pe could be a little mean for a truck