VCM Scanner 2.25 Beta Now Available

[Keith@HPTuners]

Is the formatting fixed? Whenever I tried that in the past it is spaced wrong and requires manual reconfiguration.

Formatting of what?

I've configured the user inputs (and display values) to use your current culture info, so it should work no matter what region you are, in a format you are used to.

[Higgs Boson]

I was referring to the copying of the axis values and pasting into the scanner. Whenever I have tried this it just dumps numbers in there

[MeentSS02]

I was referring to the copying of the axis values and pasting into the scanner. Whenever I have tried this it just dumps numbers in there

Same experience in 2.24...you have to go back and manually put commas in between the numbers pasted for it to work properly. Haven't tried this in 2.25 yet.

[MeentSS02]

...and just tried it in 2.25. Although commas are no longer required when defining the axis, you can only have one space in between the numbers for it to recognize them as separate values. As currently mech'd (copying an axis from the editor and pasting it into the scanner), it doesn't work unless you go back and delete the extra spaces between numbers.

[schpenxel]

...and just tried it in 2.25. Although commas are no longer required when defining the axis, you can only have one space in between the numbers for it to recognize them as separate values. As currently mech'd (copying an axis from the editor and pasting it into the scanner), it doesn't work unless you go back and delete the extra spaces between numbers.

It worked fine for me. Perhaps other tables it won't work so well? But it didn't give me any issues

[mechanicboy]

Is the PATS workaround done for the coyote ecus, truck and car versions?

[schpenxel]

...and just tried it in 2.25. Although commas are no longer required when defining the axis, you can only have one space in between the numbers for it to recognize them as separate values. As currently mech'd (copying an axis from the editor and pasting it into the scanner), it doesn't work unless you go back and delete the extra spaces between numbers.

It would be nice if you could use a comma or 1/2/3 spaces just to make it pretty syntax proof to however people want to enter it

Not sure how much of a pain that is to do though

[Keith@HPTuners]

It would be nice if you could use a comma or 1/2/3 spaces just to make it pretty syntax proof to however people want to enter it

That's how I implemented it currently, but it needs some tweaking.

[schpenxel]

That's how I implemented it currently, but it needs some tweaking.

Good deal

[Eric@HPTuners]

Is the PATS workaround done for the coyote ecus, truck and car versions?

Not yet, soon though.

[shoaf85]

I must be missing something here but I have played with the histograms/tables a little and under a new histogram it is only allowing me to add a sensor/pid to a row not a column. I have altered the timing table and knock table successfully (for a coyote car) but I'm lost when trying to create a new histogram for the MAF period vs STFT histogram like I used in the 2.24 scanner.

[Keith@HPTuners]

See post #1.

[gofastwclass]

I know your signature is a reference to a movie, is the "two weeks" button a reference to Total Recall? Hahaha

I love the new scanner. Is there going to be a reference line to show exactly where you are in the Plot vs. Time window during playback? That was really handy in the 2.24 scanner. I do enjoy how I can click within the window and the gauges go to that point in time.

I like the slider at the bottom of the Plot vs. Time window and the search feature in the PID list.
An absolutely awesome feature is the time stamp scrolling at the bottom of the Plot vs. Time window. That will be incredibly useful feature and I can't wait to reference it.

[Keith@HPTuners]

I know your signature is a reference to a movie, is the "two weeks" button a reference to Total Recall? Hahaha

Yes.

Is there going to be a reference line to show exactly where you are in the Plot vs. Time window during playback? That was really handy in the 2.24 scanner. I do enjoy how I can click within the window and the gauges go to that point in time.

yes

Couple other tips.

You can left click and hold on the Plot and drag your mouse left or right past the bounds of the chart to have it scroll through the log.
You can also use the mouse wheel to zoom in and out.

[gofastwclass]

I thought so, too funny.

I discovered the left click trying to see what it would / wouldn't do but didn't know about the scroll wheel. This software just gets better with each revision.

[XW Coyote]

Where can you download the scanner software? Do you need to have a tuner account?

[schpenxel]

Where can you download the scanner software? Do you need to have a tuner account?

You need an HP Tuners customer account (interface #)

[Wingman520]

You need an HP Tuners customer account (interface #)

Do you have to email support to gain access to the beta? I'm not seeing it in my account.

[PST]

Yes. The beta access is only granted for a short period of time. When that expires, you have to request it again.

[schpenxel]

Do you have to email support to gain access to the beta? I'm not seeing it in my account.

Yes.