VCM Scanner 2.25 Beta Now Available

**schpenxel** · 11-11-2015

Originally Posted by Keith@HPTuners

Tomorrows beta should allow you to also filter out transitions. For example, lets say you wanted to only show the data where you were on throttle (over 50%) for 500 milliseconds, you could do something like:

[50090.avg(500)] > 50 AND [50090.avg(-500)] > 50

The -500 means take the average of the future 500ms worth of data points. It might seem confusing with the -, but the idea behind this is that typically, you want to make sure you've been in a certain state for X amount of time to allow the data points to pass your filter..

So, typically, you might want to just have a filter that only triggers when you've been on the throttle for a short while, filtering out the transient stuff. Doing both the 500 and the -500 filters out the transients at the front and end of the range you're looking for.

That is eff'ing awesome. I can't wait to try it.

**schpenxel** · 11-12-2015

1. Still crashes on me every time I try to type anything in. Error report sent. It crashes when it sees the "[". After I have a formula in there I can erase back to that without it crashing. Once I get the last digit of the PID # out of there it will crash again

2. If I copy/paste something in it will go in.. but still doesn't work. This is when looking at existing logs.. have not tried it on live logging yet

1.jpg

2.jpg

3.jpg

**Keith@HPTuners** · 11-12-2015

If you put in a parameter that isn't supported by your channels, it will evaluate as 0. 0 is less than 100.

**Keith@HPTuners** · 11-12-2015

Also, the latest build is 2.25.2600.. They build about 7:15am central.

**schpenxel** · 11-12-2015

Ah ok, I dl'd around 7am central. I'll try that one. That was why I posted the build #, just to be sure I was on the latest

**schpenxel** · 11-12-2015

I tried it with a simple one this time--EQ ratio. Tried filtering for EQ > 1, then tried for EQ < 1. Resulting graph is the same both ways, which can't really be right

I'll try it with live logging in a few hours and see what happens

Am I the only one having problems? I really want this to work.. especially the transient stuff mentioned a few posts back.

EQ under 1.JPG

EQ over 1.JPG

(these are with the .2600 beta)

**ElecTech** · 11-12-2015

Originally Posted by schpenxel

Ah ok, I dl'd around 7am central. I'll try that one. That was why I posted the build #, just to be sure I was on the latest

Stop breaking the software.

**schpenxel** · 11-12-2015

Originally Posted by ElecTech

Stop breaking the software.

I'm trying

**Keith@HPTuners** · 11-12-2015

Post your log and your layout.

**schpenxel** · 11-12-2015

Here ya go (and I'm really not trying to bust your balls, just trying to give you whatever is needed to get it going--hopefully I'm just doing something wrong and it's my fault)

esc 2.25, 2.hpl

Beta Layout.Layout.xml

**Keith@HPTuners** · 11-12-2015

Bizarre, your files work for me.. I'm able to do > < = and see the change instantly.

**schpenxel** · 11-12-2015

Weird.. I dunno. I may try totally uninstalled/deleting everything and starting from scratch and seeing how it goes

I have 2 other computer, I'll try it on those too just to see

**schpenxel** · 11-12-2015

lol, my other one is even worse. On it, the plot vs. time and graphs are both staying blank no matter what I do

edit: disregard ^. I opened the layout I posted earlier and the graphs/plot started working

-----

Same thing on the " [ " though.. as soon as I type it into the filtering function box, it crashes.

Also the same in regards to filtering not working. I can copy/paste to get around the crashing but it doesn't do any filtering then

**sssnake** · 11-12-2015

I get the same ^^^^^. Error report sent. Just using the default file with the NGK AFX Lambda added.

2015-11-12.png

**Keith@HPTuners** · 11-12-2015

I just put up a new beta, .2601, this should fix the crashing issue. Give it a try.

**schpenxel** · 11-12-2015

Crashing is fixed

Filtering is working on one computer and not on another.. I'll mess with it some more and report back

edit: (laptop) well, filtering was working.. I closed the graph layout editor, went back to it, and now changes are back to not working. I haven't figured out what got it to work yet

edit2: Tried on my desktop and it's working exactly like you'd expect it to. Not sure why I'm having the issue on my laptop

edit3: went back to make another change to the filter on the desktop and now it doesn't work either. Anything put in the function field has no affect

**DarrylC** · 11-12-2015

Keith, is it possible to have:

[SpanishOak.DMR(-1209599999)] > 0

**Sparkey** · 11-12-2015

Finally got around to testing the EIO in 2.25. Connected an AEM Wideband and the values in HPT were very wrong . The AEM settings provided by default in HPT are Output=(V/.5)+10, based on the information given by AEM the formula for this unit should be different. Should I expect to see User Defined Wideband/EIO settings coming like in 2.24 in the near future?

**DarrylC** · 11-12-2015

Sparkey, you must have a different AEM wideband to mine (30-4100) as that formulae is correct for me (AEM quotes V * 2 + 10.0 but that is the same). My only issue is that I need to compensate for the ground difference.

**ElecTech** · 11-12-2015

Originally Posted by Sparkey

Finally got around to testing the EIO in 2.25. Connected an AEM Wideband and the values in HPT were very wrong . The AEM settings provided by default in HPT are Output=(V/.5)+10, based on the information given by AEM the formula for this unit should be different. Should I expect to see User Defined Wideband/EIO settings coming like in 2.24 in the near future?

V/.5+10 is the same as V*2+10, mathematically.

Thread: VCM Scanner 2.25 Beta Now Available

Thread Tools