Unable to use VPMI Pro Interface after update.
Hello,
I'm working on a LS7 crate engine with a HP Tuners suite and a MPVI Pro interface.
Sometimes the signals with VCM Scanner freezed or they came so slowly (1 frame every 5 seconds) that it was impossible to log.
I tried almost everything: restart the car, unplug the MPVI, use different USB cables, use different PC...
I ended up locking for a solution on the HP tuners forum.
I founded and downloaded the new HP tuners 3.0 suite hoping to solve my problems.
I installed it and, as I tried to connect to the car, VCM Scanner asked me to update the MPVI.
I followed the instructions, updated the interface and everything went well.
Now I can see the MPVI on the system peripherals, I can connect with VCM Scanner, but as I try to start logging the record button doesn't work.
In the "Vehicle --> MPVI Pro Data Logging" menu, as I press "Get Info", appear strange font VIN and ECM OS ID number.
VCM Editor when I try to read the ROM says: "Detect Controllers And Get Basic Info: Failed".
titled.jpg
What I read in VCM Suite Info is:
Operating System: Windows 8
Microsoft .NET: 4.0.30319.42000
CPU: Intel(R) Core(TM) i7-4700HQ CPU @ 2.40GHz
Available Memory: 9,474 MB
Device ID: XXXXXXXXXX
Application Key:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXXX
Available Credits: GM 6/8, Ford 0/0, Dodge 0/0
Available License Slots: 407/409
[Specific Vehicle]
GM Generic GMPP Crate Motor, XXXXXXXXXXXXXX, [Evantra 01], (GM: 2)
Id: XXXXXXXXXX
Hardware: 0121
Firmware: 0120
PartNumber: 0000006220
BuildDate: 9/22/2015 12:00:00 AM
InterfaceOnTime: 00:45:31.9100000
ROM: 00 3F 00 81 00 01 00 00 FF
Config: CC 88 00 00 00 40
System Info: F7 00 00 00
Comm Errors: 40 00 00 00 00
SPI Info: 20 15 FF FF 4E 41 00 00
VehicleConnectedTime: 00:45:31.9100000
DetectedProtocols: CAN
SAE J1979 Info: CAN, 500 kb/s, Standard 11 bit, 500 kb/s, ECM: 7E8, TCM: 7E9
I'm completely stuck, now I can't even flash different ROMS on the ECU.
Is there a solution?
Thank You in advance.
Alberto
Reply With Quote
