This is the first Dodge I'm attempting to calibrate, so forgive my ignorance.
Vehicle Details:
- 2008 SRT8 Charger
- Kooks LT headers
- Kooks high-flow cats
- Cold Air intake (not sure what brand)
- Vehicle was tuned by another shop for these existing mods, so I don't have the stock file
All I've done is read the tune and took a quick scan to see if it was throwing any DTC's, which it was. The codes that were thrown are U0100, U110B, and U0164. I'm confused why it's throwing these codes in the first place. Anyone have ideas? Also, I'm surprised it's not throwing any catalysis codes considering none of them are turned off. However, it is showing the readiness tests not complete. I also see there's no option to set the catalysis and O2 codes to "No Error Reported", you can only turn them off?
Anyways, tybob was kind enough to send me a copy of a 2007 SRT8 Charger tune, which I'd assume should be identical to the '08 version. Both are included below. Any assistance with the codes or just advice for tuning Dodges with HPT would be great!
-Shane
CodesBob.JPG