Results 1 to 3 of 3

Thread: Scanner Issues

  1. #1
    Tuner in Training
    Join Date
    Mar 2010
    Posts
    27

    Scanner Issues

    It appears after an update that I lost a ton of parameters that I was able to datalog. One of the most important being EG Ratio. This is on an 05 Cadillac CTSV. Is anybody aware of a fix for this?

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    Update to the newest version from your customer page, then open the scanner and clear the last vehicle used.

    Plug the cable into your obd2 port and start to scan, it should poll all the avalible files/pids that can be supported for that vehicle.

    Thats the easiest thing to try and first thing I'd do.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Tuner in Training
    Join Date
    Mar 2010
    Posts
    27
    I have already tried downloading the latest version again. I was unaware of the "clear last vehicle feature". I tried that and nothing changed. I'm going to delete all of the HP stuff and do a fresh download to see if that helps.