Results 1 to 3 of 3

Thread: 0411 pcm real time tuning

  1. #1
    Potential Tuner
    Join Date
    Jan 2015
    Posts
    6

    0411 pcm real time tuning

    I converted my 0411 pcm over to the maf real time tuning using the editor but when I go to the scanner and open the real time tuning tab it says there are no real time tuning parameters. Am I missing a step or is the 0411 pcm not supported.

    This is a pcm swap from a 2001 express van 5.7

  2. #2
    Tuner in Training
    Join Date
    Nov 2014
    Location
    USA
    Posts
    18
    New to this and I would like to know this info too.
    Swapped a 2005 6.0 w/ 411 PCM in my T/A

  3. #3
    Potential Tuner
    Join Date
    Jan 2015
    Posts
    6
    I was a little quick to ask this question as I easily found it on my own. After you convert to the rtt os you must enable rtt in the tune and flash it to the pcm. Once this is done the scanner recognizes the rtt.