Results 1 to 3 of 3

Thread: 2013 Camaro Whipple MIL P0603

  1. #1
    Tuner
    Join Date
    Sep 2011
    Location
    Germany
    Posts
    196

    Question 2013 Camaro Whipple MIL P0603

    I have a 2013 Camaro with whipple supercharger mild cam and headers on the dyno. car runs nice and make good power but every time I start up MIL is on and P0603 internal control module keep alive memory (KAM) error is set. I disabled this dtc to no error reported and mil off but its just the same dtc is set and MIL comes on. do you guys have any ideas?
    Attached Files Attached Files
    Last edited by zr1driver; 01-27-2015 at 03:41 AM.

  2. #2
    Advanced Tuner veee8's Avatar
    Join Date
    Apr 2006
    Location
    Raleigh, NC
    Posts
    449
    Keep the driver door open while flashing. I have run into this on 2013's before.
    www.crawford-racing.com
    Home of the original and best selling CR-Fueler plug and play port injection controller kits for all GM Gen V direct injection platforms.

  3. #3
    Advanced Tuner
    Join Date
    Jan 2008
    Posts
    242
    Its fuel Pump flow control, check your wires voltage and ground.