This is a remote tune for a shop that was dealing with another tuner on this prior to my involvement.
I was hoping I could fix it quickly but unfortunately that's not the case.
Here are the details:
- 2007 Solsitice 2.4 swapped into a Fiero
- got the tune dialed in and car runs fine to 6000rpm.
- make another pull in the car 5 minutes to an hour later and the car shuts down (like limp mode) at 4000rpm
- tried changing anything torque management related (and somethings I have no idea what they do to try to resolve the problem - but no dice).
In the attached logs 3c the operator lifted at 5400, in 4c it "shutoff"
Any help would be appreciated.
Thanks in advance!
Mike