Results 1 to 3 of 3

Thread: Running LS3 w/ 24x wheel and 2002 ls1 computer - few questions

  1. #1
    Potential Tuner
    Join Date
    Mar 2012
    Posts
    2

    Running LS3 w/ 24x wheel and 2002 ls1 computer - few questions

    I am getting the low signal code and it doesn't start on the first try so i have a few questions... i am very unfamiliar with these swaps so please go easy on me. LOL

    I have heard about the swapped wire and I have done that and I am still getting the code. I have also tried installing .5 diode to get it to work. Still get hard starts and code.

    I guess my question is which cam sensor do I need. LS3? LS1? Does anyone have an exact part number?

    And which cam gear do I use? Half moon?

    Just want to be sure I have all the right parts before I tear into it.

    Again its an LS3 block with an LS1 computer.
    Last edited by ewillmann; 12-08-2014 at 06:46 PM.

  2. #2
    Senior Tuner
    Join Date
    Sep 2008
    Posts
    1,668
    You should use the 2005 GTO cam gear.
    2010 Camaro SS M6. Stock Bottom End, Heads/Cam/Intake/Headers/Exhaust.
    2005 Silverado RCSB. Forged 370 LQ9/Borg-Forced Inductions T6 S484/Jake's Stage 4 4L80E with D3 Brake/4WD.
    2023 Durango Hellcat

  3. #3
    Potential Tuner
    Join Date
    Mar 2012
    Posts
    2
    Turned out the builder did have the wrong timing gear on it. Problem fixed.