We started a new project, we need some help.
We are installing a M62 SuperCharger on my 06 Cobalt SS 2.4L with 5 speed trans.
We are wanting to run the existing PCM because I want to keep the VVT feature.
We also want to run both IAT sensors, SCIP sensor, Baro sensor, and the boost signal from the PCM to the gage.
Problem: We cannot find a PCM pin-out to hook these to the PCM.
The 2.0 P SC engine appears to use a different PCM, does not support VVT.
These are the # on my PCM 12603530 YNAB
The pin-out diagrams I have access to (GM), do not show these sensor input pins.
Help