06 Cobalt 2.4 Supercharger install

[JMsquared]

We started a new project, we need some help.

We are installing a M62 SuperCharger on my 06 Cobalt SS 2.4L with 5 speed trans.

We are wanting to run the existing PCM because I want to keep the VVT feature.

We also want to run both IAT sensors, SCIP sensor, Baro sensor, and the boost signal from the PCM to the gage.

Problem: We cannot find a PCM pin-out to hook these to the PCM.

The 2.0 P SC engine appears to use a different PCM, does not support VVT.

These are the # on my PCM 12603530 YNAB

The pin-out diagrams I have access to (GM), do not show these sensor input pins.

Help

[NADC]

I would try a LSX 376 motor tuned by MAC

[JMsquared]

I would try a LSX 376 motor tuned by MAC

I cant afford the shoe horn!

[ChrisA]

This guy did what you're asking about: http://www.cobaltss.net/forums/2-4l-...-build-280597/