I did the conversion from pressure delta to VAC KPA. Then copied corresponding columns and interpolated in between columns. Just wanting someone to check my work and make sure I didn't mess this up. The data is going to be used by a friend in his turbo LS1 S10. The OS I used to work this is a 2001c5z.
Also Greg Banish was saying that these injectors have a different spray angle than regular LS injectors and the transient tables would need tobe adjusted to account for wall film effects. I need an idea of which tables to adjust for this. My other idea would be to change the EOIT and spray with an open intake valve instead.
Thanks
Jim
zr1 injectors.hpt