LTFT STFT reset

[GCtech]

I cant find the option on the VCM scanner to reset trims is not avaliable , are trims reset everytime a new write is loaded? or do I have to disconect the battery to reset them everytime?

Thanks

[b2009v]

should be under vcm controls fuel & spark, at least for gm it is.

[GCtech]

should be under vcm controls fuel & spark, at least for gm it is.

It is there but cant click on the reset option like on GMs, looks like the only way to reset it is by removing a 20amp fuse for 20seconds or disconect the battery,

[ElecTech]

should be under vcm controls fuel & spark, at least for gm it is.

It is there but cant click on the reset option like on GMs, looks like the only way to reset it is by removing a 20amp fuse for 20seconds or disconect the battery,

The bi-directional controls are only valid for GM cars. Easiest way on a Dodge/Chrysler is by battery disconnect. A reflash usually won't do it.

[GCtech]

I uplug the 20am fp/asd fuse that did the trick.