Results 1 to 2 of 2

Thread: PLX wideband

  1. #1
    Potential Tuner
    Join Date
    Sep 2014
    Posts
    9

    PLX wideband

    Trying to connect a PLX WB to my scanner

    It always give me 10,4-5 that's it , I used the predefined parameter ad it to input 1 , by connecting the gray wire to plug 1 and the plug 5 from the gage ground,
    The gage from the PLX give me 14.7 but not from the output analog .
    In my scanner I did insert the PLX predefined ,

    Is something I forget ? I did follow all instruction , I ask William and is answer was call PLX (not very helpful)
    If somebody use PLX and kno my problem , it will be appreciate help.

  2. #2
    Potential Tuner
    Join Date
    Sep 2014
    Posts
    9
    Found it ,