While not new to tuning I am new to this conversion.
We installed the EFI Connection 24x conversion on a customers 96 Impala SS with a Vortech V3.
EFI connection provided a PCM with the swap which ended up being from a 2002 4.3l V6 S-10.
While logging I have everything present except for spark. Im not sure if I did wrong by pulling the V6 tune out and modifying it to a V8 or do I need a full flash from an LS1 Auto F-body?
Hey, Just got it to fire. I did some research and the 02 4.3 V6 and V8 F Body have the same operating system. I then imported all of the dwell settings from the F-Body into the V6 file and it fired right up.