try to rescale your ETC rpm axis (normalizer)
try to rescale your ETC rpm axis (normalizer)
Follow @MASTUNING visit www.mastuned.com
Remote Tuning [email protected]
Contact/Whatsapp +966555366161
Thanks Sultan, I did that and it stills limiting rpm to 2000
Thanks
Eric, I am working on getting a log for you . For some reason i keep getting a Initalization error every time i try to log the Mustang with the 2.24 scaner
Thanks
I'm having the same issue on a 2012 F150 5.0L
I can provide logs. The 2.24 scanner seems limited, and ID's it as a Silverado, however I assume it will still scan correctly? Are the parameters the same?
'17 Whipple'd S550
Too many other projects to list.....see my YouTube channel for more: https://www.youtube.com/channel/UCr7...-XfDG53sCh6tcw
Buy a JPC Line Lock kit, I figured out how to make it work on these cars back in 2010. A few have copied it since. We sell it as a complete kit so you can sit there and burn the tires off all day lol
Ok if you look under engine torque management there are three limiter tables fuel - fuel and spark - spark only there you will find the answer to the BOA 2000 rpm limiter
What are the desired changes to those tables?
www.crawford-racing.com
Home of the original and best selling CR-Fueler plug and play port injection controller kits for all GM Gen V direct injection platforms.
Thats the tables to work!!! ...i finally can do a decent burnout thanks a lot for your tips
Your welcome just takes a little looking with all the hints i gave !!!!! I spent a lot of time on this thank god that part is over. I could not tell all as i do not make money doing this and most tuners will not help you out whitch i can under stand if that is how they make there living but they should spent a little more time on R&D work.
Also curious one this as well.
Read post # 27 and you will find the answer
lol, I asked what changes were made over a year ago still never got a concrete answer, and now I don't even remember why I asked.
Hi eric i have same issue can u help me with or anybody i have mustang v6 2014 when i start to do a burn out my rpm staying on 2000 can u help me with plzz