Hi All,
Can anybody tell me what limits the engine rpm to ( 2000 ) when in gear and the brake is applied ! This is what stops you from heating up the tires or doing a burnout . Any help would be greatly appreciated.
Thanks
Hi All,
Can anybody tell me what limits the engine rpm to ( 2000 ) when in gear and the brake is applied ! This is what stops you from heating up the tires or doing a burnout . Any help would be greatly appreciated.
Thanks
Hummm ! nobody knows ???? Interesting
Ford calls it BOA brake over acceleration...I'm pretty sure getting rid of some of the torque management or resetting to higher number on some of the torque value limits will do away with it....
Well i think i diabled all the torque management i can find and it still limits rpm to 2000 !!!! Anybody have anymore advice ??????
Thanks
Raise the Inferred Movement RPM in the Trans General tab.
Russ Kemp
Thanks Russ I will try this
Sorry for crashing this thread but Im also having this trouble and i already raise the inferred movement to 8000rpms and still have this same.2000 limit any other ideas is a 2013 gt auto
all the way from Tampico bay Mexico
Yes I also just did this and it did nothing !!!!! I think there is a parameter missing we are not seeing ??? Thats all i can think of !!!
Ok thanks Eric
Please post the file so I can have a look.
Eric Brooks
HP Tuners, LLC
the 22 file is my current for the street the limiter one is the no torque managmet file in that one it lights all the traction and stability control warning lights but that was my poor try to eliminate this annoying issue so please check them eric ,sultan, russ, anyone HELP cause i have a drags with cops permit this weekend and i dont wanna be embarrassed cause ill be the only one that cant do a decent burnout
all the way from Tampico bay Mexico
Disable the trans torque truncation, and also try disabling the master enabled under torque reduction.
Russ Kemp
Thanks Russ I tried all that and it still limits RPM to 2000 when brake is applied !
Eric, I will post a copy of my stock file for you in the morning
Thanks
[ATTACH]46902
Here is a copy of a stock 2014 Mustang 3.7 V6 Auto. file
Thanks
Eric did you find anything ?????????
Thanks
Eric, no this did not correct the issue still limiting rpm to 2000
Thanks
Ok will do
Thanks