-
Tuner in Training
Check out my VE
StockVE.PNG
TunedVE.PNG
I followed along with the Cpig tuning guide. But the more runs I made and corrections that followed, my VE table kept dropping. I eventually stopped where I was at. The truck runs fine. It is completely stock. I'm just curious if my VE table is headed in the correct direction. If that's even the right way to say that? lol
Z71 Rev8(trannyshift).hpt
If anything else needs to be posted, let me know.
Last edited by WillRyan; 09-05-2014 at 03:28 PM.
-
Tuner
Was your MAF disabled for this tuning?
-
Tuner in Training
Yes! I watched my STFT and LTFT and then add special half into the VE table. But the more times I did it, the lower the table went!
-
Tuner in Training
Z71 Learning LTFT.hptZ71 Setting Up STFT.hpt
Here are the two tunes that were used to learn the STFT and LTFT!