-
Potential Tuner
"TCM Boot Loader Download Request timed out." error received
Hey all, this is my first post, so be gentle...
Vehicle: 2005 Chevy 2500 8.1 with the Allison Transmission, larger cam, new heads.
I converted the Operating System to 1bar, tried a write entire, and it failed on the TCM. I then retried, and got a completed result. However, I tried going back to the stock tune, to test something. I then repeatedly got a "TCM Boot Loader Download Request timed out." error every time trying to write entire the stock tune. I get the same error trying to only write changes. After this error DTC codes P0802 and P1626 are thrown. At first I though the TCM was erroring due to the DTC's, but the doesn't seem to be the case.
I've monitored the battery voltage (always has been above 12.3V), and have disconnected the fuses for the trailer brake controller and the stereo & stereo amp (even though both are stock).
Let me know what to post, and I'll send it. I'm at the point where I'm thinking of using my VCI with GM tisweb to try and force a reflash of the TCM.
Any other ideas would be appreciated!IMG_3397.jpgIMG_3394.jpgBigWhite2005GMCTruck-Seans.hpt
VCM Info:
Operating System: Win32NT 6.1.7601.65536
Microsoft .NET: 4.0.30319.18444
CPU: Intel(R) Core(TM) i7 CPU M 640 @ 2.80GHz
Available Memory: 2,265 MB
VCM Suite Product: VCM Editor 2.24.649
VCM Suite Key:
VCM Suite ID:
GM Credits: 2 used out of 8 purchased.
Ford Credits: 0 used out of 0 purchased.
Dodge Credits: 0 used out of 0 purchased.
License slots available: 407
Single Vehicles:
0MA05LF85006 - Chevy Silverado (V8) 2005 - 05BigWhitey
ID: 1266500928 Date: 06/12/14
Hardware: 121 Firmware: 116
Part Number: 6221
Rom Status: 0 3F 0 81 0 1 0 0 FF
SPI Info: 0 0 0 0 0 0 0 0
Config: CC 0 0 0 0 80 System Status: F7 0 0 0
Comm. Status: 0 0 0 0 0 On Time: 00:00:06.3900000, 00:00:06.3900000
Type: Chevy Silverado (V8) 2005, P59 Allison
VIN:
VCM ID: 0MA05LF85006
ECM OS ID: 12593555 [Editor] [Scanner] P59
ECM Calibration IDs: 12593555 12591930 12592573 12582848 12582858 12593410 12593769 12582917
ECM Seed: 0
TCM OS ID: 15196784 [Editor] [Scanner] Allison
TCM Calibration IDs: 15196785 15196784
TCM Seed: 0
Last edited by ayarbro; 09-05-2014 at 01:19 AM.
-
Potential Tuner
.....Cool.....
So are we still at the impass that the Allison transmission is still not supported??? Even though I had no errors prior to the OS conversion? I guess any info, maybe even a "F U, you're dumb" would be great at this point. Any elaboration on the comment would also be great.
Thanks for everyone chiming in!
-
Senior Tuner
It is a problem with HPT yet to be fixed. My last responce from Bill was thats just how it is. If you are using an older version of hpt try newer, if newer try and find older. Pull radio and onstar fuses. Once you have had an error like you have disconnecting the battery for awhile seems to make it work. Have no clear cut answer for you, its hit and miss.