trying to turn off drive by wire and I am new at this software. can anyone help me. I have a stand alone harness so need to get rid of the vats, drive by wire so I can make it cable and get rid of the rear o2s. any help will be appreciated.
trying to turn off drive by wire and I am new at this software. can anyone help me. I have a stand alone harness so need to get rid of the vats, drive by wire so I can make it cable and get rid of the rear o2s. any help will be appreciated.
Post the tune.
stock 1.hpt
there is the tune its fairly stock.
Vats is turned off in the tune. You need to do a write entire when you flash to make it stay. Also look at dtc 420 and 430.
2015 Corvette Convertible
1992 GMC with 5.3 LM7
Factory Five Roadster LS1 Tremec TKO
To turn off drive by wire in this particular tune, go to System - General, then open the system menu and set the 1 under the ETC row to a 0.
2010 Camaro SS M6. Stock Bottom End, Heads/Cam/Intake/Headers/Exhaust.
2005 Silverado RCSB. Forged 370 LQ9/Borg-Forced Inductions T6 S484/Jake's Stage 4 4L80E with D3 Brake/4WD.
2023 Durango Hellcat
Most of what you wanted done was already done in the tune, the rest now is. As stated you should do write entire for vats. You can open your file and this file to compare to see differances.
how do I get to the system menu? I cant find it. I know how to get to system to general where I can turn off the vats but idk where to do the rest.
Last edited by MikeOD; 09-06-2014 at 04:04 PM.
2010 Camaro SS M6. Stock Bottom End, Heads/Cam/Intake/Headers/Exhaust.
2005 Silverado RCSB. Forged 370 LQ9/Borg-Forced Inductions T6 S484/Jake's Stage 4 4L80E with D3 Brake/4WD.
2023 Durango Hellcat