Results 1 to 4 of 4

Thread: 2010 CTS- V 6L90e Rev Match on down shift in manual mode

  1. #1
    Potential Tuner
    Join Date
    Dec 2013
    Posts
    5

    2010 CTS- V 6L90e Rev Match on down shift in manual mode

    With my tune I was experiencing flaring on downshift during closed throttle stopping. It was the worst on the 3-2, and 2-1 downshifts. I googled the issue and found this link.

    http://6l80etuning.com/forum/somethi...que-management

    So I tried what the original poster said and it worked! (FYI: I couldn't see the replies on that thread as I'm not a paying member there.)
    So now, no flares on CT downshifts, very smooth! Sweet. However, I lost the Rev Match when manually shifting. I really liked feature.


    How can I get the Rev Match on manual downshifts back with keeping smooth CT downshifts? BTW I drive in Sport mode 99% if that matters. Tune attached.
    I appreciate your help!
    Attached Files Attached Files

  2. #2
    Tuner blkscooby's Avatar
    Join Date
    Aug 2010
    Location
    Mesa, AZ
    Posts
    81
    Rev matching only works when CT TM is enabled.

  3. #3
    Potential Tuner
    Join Date
    Dec 2013
    Posts
    5
    Well I changed Trans>Torque Management> Torque Reduction> CT Downshift to Enable(left flare TqMngt to None) and....

    Rev Match is back but the flaring on the downshift is back too, about 80% of the time on CT downshifts.

    I hate it and need to figure out why it does that. Anyone with ideas?

  4. #4
    Senior Tuner
    Join Date
    Jul 2020
    Location
    VIC Australia
    Posts
    1,158
    Old thread revival but it's a good title that is easily searched.

    Possible solution here for future reference. Untested. Please report if anyone tries it.

    Screenshot 2022-12-13 082934.png