2010 Camaro P0106

[granatl]

I have a boosted 2010 Camaro with the red label MAP sensor. Now that I've been turning up the boost above 10 PSI, it often trips a P0106 (MAP/Baro Sensor Range/Performance) error on fast acceleration. I have the linear & offset at 312.50 & -11.25. And the MAP Delta pegged across the board at 255.99 ("256") under Engine Diag -> General -> P0068 -> MAP Delta

The red label ZR-1 MAP sensor is a 3-bar, right?

Any suggestions on what to change?

[SultanHassanMasTuning]

I believe the E38 PCM max support MAP sensor is 2.5 and ZR1 is 3 bar

[granatl]

Thanks for the info! IDK that, but will go buy a 2.5 one.

[DSteck]

Disable the test. That code isn't meaningful.

[granatl]

Will do. Thanks!

[MikeOD]

You can use that MAP sensor, just disable the code/test.

[granatl]

I disabled it this morning. Thanks for the info guys