-
Tuner
Lost1 Why is my MAP reading so high
All of a sudden my MAP reading is very high. It is showing crazy numbers like 155 at idle and then 300's driving around and I can't figure out why. Car is running normal and my boost gauge works fine so which tells m its setting. It is a 3 BAR GM MAP Sensor.
MAP JACKED.hpl
Last edited by edge04; 08-08-2014 at 03:13 PM.
-
reading 53kpa at idle, looks fine to me.
normal.JPG
-
Tuner
the table shows correctly but on the chart it reads wrong and it doesn't matter what config I use.
MAP.png
Last edited by edge04; 08-08-2014 at 04:07 PM.
-
Tuner
Has this ever happened to anyone before? It does the same with boost, I created the Boost PID using the instructions under Help and it would read 33 at idle.