Results 1 to 9 of 9

Thread: St.Louis area tuners

  1. #1

    St.Louis area tuners

    Does any in the St. Louis are have hp tuners... I need an ecm reflashed for my S10 project... Most places want an arm and a leg to do it..Id rather help a member out..

  2. #2
    Senior Tuner DSteck's Avatar
    Join Date
    Mar 2008
    Location
    St. Louis, MO
    Posts
    4,856
    What do you need flashed on it?

    DSX Tuning - Authorized HP Tuners Dealer
    http://www.dsxtuning.com
    http://www.facebook.com/dsx.tuning
    Just say no to bull s***.
    IF YOU WANT HELP, POST A FILE!

  3. #3
    Need an express van bin flashed to it.. Then remove vats,change speedo,etc... Basically just turn off stuff

  4. #4
    Senior Tuner DSteck's Avatar
    Join Date
    Mar 2008
    Location
    St. Louis, MO
    Posts
    4,856
    I assume the ECM doesn't start off with a V8 calibration. If you can get a V8 van file flashed in, I can do the easy stuff for fifty bucks. I have a friend who can probably bench flash it with a Tech-2.

    DSX Tuning - Authorized HP Tuners Dealer
    http://www.dsxtuning.com
    http://www.facebook.com/dsx.tuning
    Just say no to bull s***.
    IF YOU WANT HELP, POST A FILE!

  5. #5
    No its the stock v-6 comp... let me know if your friend can flash it.. its the only thing keeping me from driving my blazer again

  6. #6
    Senior Tuner DSteck's Avatar
    Join Date
    Mar 2008
    Location
    St. Louis, MO
    Posts
    4,856
    Get me the VIN for an appropriate van file, and we can go from there.

    DSX Tuning - Authorized HP Tuners Dealer
    http://www.dsxtuning.com
    http://www.facebook.com/dsx.tuning
    Just say no to bull s***.
    IF YOU WANT HELP, POST A FILE!

  7. #7
    Try this one.. Found a van on ebay that had the vin listed

    1GNFG65RX11219048

  8. #8
    I think I found the express van .bin file.. Just need it flashed to the ecm and turn off the esay stuff

  9. #9
    me and the gf toke a trip to West Plains.

    Had brendan from lt1swap.com flash the ecm... Great guy to deal with..