Page 2 of 2 FirstFirst 12
Results 21 to 26 of 26

Thread: got a real interesting one for ya

  1. #21
    Advanced Tuner CatnipG5Bandit's Avatar
    Join Date
    Apr 2013
    Location
    El Paso, TX
    Posts
    297
    Quote Originally Posted by ari666 View Post
    LOL! was that a dig at me being upside down?

    i had a quick squizz at a few other L29 tunes, but wasnt able to view them. im now realising its because i was trying to view them as a comparison, and theyre totally different PCMS...
    Lol nah. I know that some foreign sites no matter where you are don't display all the information they could. Glad you got it running. Definitely shouldn't have to give it throttle to start it. If I could have saved the cranking VE file I would have but it'd cost me 2 credits. Sorry bro.

  2. #22
    Tuner ari666's Avatar
    Join Date
    Oct 2011
    Location
    australia
    Posts
    61
    Quote Originally Posted by CatnipG5Bandit View Post
    If I could have saved the cranking VE file I would have but it'd cost me 2 credits. Sorry bro.
    mate, I hugely appreciate even just having another set of eyes. I never would've picked up on MAF or found that table alone.

    anyway, here is my tune so far. mostly loading so I can read on my PC reading than squinting that this laptop.

    readentire.hpt
    1966 impala. L29 454. 0411 pcm. 2.5" twin system. comp cams XR282HR. ported heads. 1.75 rollers. 60lb deka injectors. bosch 044 pump. standard intake (cos' looks cool in a 66')

  3. #23
    Tuner ari666's Avatar
    Join Date
    Oct 2011
    Location
    australia
    Posts
    61
    once its done a few road hours and a visit to mr dynomometer, ill load it into the repository in case there is some other idiot who wants to put a L29 in his 60's yank car and run a commodore computer off it...
    1966 impala. L29 454. 0411 pcm. 2.5" twin system. comp cams XR282HR. ported heads. 1.75 rollers. 60lb deka injectors. bosch 044 pump. standard intake (cos' looks cool in a 66')

  4. #24
    Tuner ari666's Avatar
    Join Date
    Oct 2011
    Location
    australia
    Posts
    61
    for me:
    VT, VX, VY V8 5.7L LS1 (300KW, GTS)
    0 280 155 890 (EV6)
    24.57 LB/HR 252 CC/MIN 185.74 G/MIN 12.0 Ohm 3.5Bar OP

    injectors2.xls
    Last edited by ari666; 08-26-2014 at 07:16 PM.
    1966 impala. L29 454. 0411 pcm. 2.5" twin system. comp cams XR282HR. ported heads. 1.75 rollers. 60lb deka injectors. bosch 044 pump. standard intake (cos' looks cool in a 66')

  5. #25
    Tuner ari666's Avatar
    Join Date
    Oct 2011
    Location
    australia
    Posts
    61
    p.s. my car made 300hp on the dyno with a rubbish transmission.

    still needs lots of fixups, but the torque is pretty mind blowing.
    1966 impala. L29 454. 0411 pcm. 2.5" twin system. comp cams XR282HR. ported heads. 1.75 rollers. 60lb deka injectors. bosch 044 pump. standard intake (cos' looks cool in a 66')

  6. #26
    Tuner ari666's Avatar
    Join Date
    Oct 2011
    Location
    australia
    Posts
    61
    Last edited by ari666; 09-11-2014 at 04:59 PM.
    1966 impala. L29 454. 0411 pcm. 2.5" twin system. comp cams XR282HR. ported heads. 1.75 rollers. 60lb deka injectors. bosch 044 pump. standard intake (cos' looks cool in a 66')