I bought the 2 bar Smartfireinjectors MAP sensor and this is the data i got with it.
Volts PSIa
0.5 -14.7
0.75 -12.83
1 -10.95
1.25 -9.08
1.5 -7.2
1.75 -5.33
2 -3.45
2.25 -1.58
2.5 0.3
2.75 2.18
3 4.05
3.25 5.93
3.5 7.8
3.75 9.68
4 11.55
4.25 13.43
4.5 15.31
They don't give me a 0 volt pressure. I can get the 5 volt one by just adding the linear amount.
Is this going to work for me?
I think i have the wrong numbers because my VE table seems out of wack.
Thanks,
Tim
98 camaro. 76mm turbo Stock engine. 60lb SD injectors.My 1998 Camaro 2 BAR WORKING TUNE 7.4.2014 OPEN LOOP.hpt2 bar.cfgFirst boost.hpl