Looking for the data Texas Speed provides with their 100mm MAF sensor for a P01 pcm (99-02 F-car).
Looking for the data Texas Speed provides with their 100mm MAF sensor for a P01 pcm (99-02 F-car).
Multiply the MAF table by 1.6. That should get the car running and you can proceed tuning from there.
Thanks. I'm fixing a tune that was pretty messed up by another tuner. Texas Speed says they will provide the table for purchasers of the MAF. The customer bought the car with it already on it and I have not seen a car with one before this one. Since he cant show he or I purchased it, I don't know if Tx Spd would provide it if I asked them for it. I'll give your suggestion a try.
Did you call them and ask? I would rule that out before starting down a different path. Granted their data will just be ballpark because your intake path will affect the sensor's ability to read, but it should be closer than scaling the existing table. Either way, you'll need to do your typical MAF tuning.
Kenne Bell Supercharged 2003 Corvette Z06