Results 1 to 5 of 5

Thread: AFR table question

  1. 07-02-2014 #1
    LS1GT
    LS1GT is offline
    Tuner in Training
    Join Date
    Apr 2014
    Posts
    45

    AFR table question

    Is there any reason I cant run PE Enrichment EQ ration this way. I got to where im close to 12.5 up to around 2800 Rpms and fatten it up to around 11.5 above that. Reason being is I leave of the trans brake around 3k and that's where I go wot to activate the nitrous. Also under the PE throttle pedal tables, why not make those values all 100% tps to enable PE mode? thanks
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  2. 07-02-2014 #2
    LS1GT
    LS1GT is offline
    Tuner in Training
    Join Date
    Apr 2014
    Posts
    45
    better yet is there any reason to change the pe throttle hot/cold tables?
    Reply With Quote Reply With Quote
  3. 07-03-2014 #3
    LS1GT
    LS1GT is offline
    Tuner in Training
    Join Date
    Apr 2014
    Posts
    45
    I figured it out.
    Reply With Quote Reply With Quote
  4. 07-03-2014 #4
    madmann26
    madmann26 is offline
    Tuner in Training
    Join Date
    Jun 2014
    Posts
    40
    Engine-Tq Management- General- ETC Limits- "ETC Injector Disable"

    Might want to put 255 in all the cells. If TM ever kicks in, it starts turning cylinders off/limiting flow.

    255 forces all cylinders to remain active, 0 turns them off altogether.
    Reply With Quote Reply With Quote
  5. 07-03-2014 #5
    LS1GT
    LS1GT is offline
    Tuner in Training
    Join Date
    Apr 2014
    Posts
    45
    I went ahead and made the change, I never heard of that table. Ill check it out I thought I had TM disabled but ill double check. Thanks
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »