Results 1 to 11 of 11

Thread: Ti-VCT Tuning

  1. #1
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409

    Ti-VCT Tuning

    I am planning on an in depth post on tuning the newer Fords, but for those of you eager to get into it, this link should help.

    This info is older, but it gives you a better idea of how the system works.

    http://www.google.com/patents/US6539...ed=0CDsQ6AEwAQ
    Eric Brooks
    HP Tuners, LLC

  2. #2
    Advanced Tuner
    Join Date
    Jul 2009
    Posts
    326
    The tables available for the coyote are far greater than that of the Aussie for yet both are 'apparently' TiVCT. It would be appreciated if you could review the available tables for the Aussie fords :-)

  3. #3
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    The aussie pcm is much less complex, but I do intend to continue adding parameters into those definitions.

  4. #4
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    Eric,

    what needs to be highlighted are the weighted tables per every OS, i think i saw a that table but its not labeled has ???? in the axis's
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  5. #5
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by SultanHassanMasTuning View Post
    Eric,

    what needs to be highlighted are the weighted tables per every OS, i think i saw a that table but its not labeled has ???? in the axis's
    I'll be correcting that

  6. #6
    Very Cool! Thanks for the info. I hope I can wrap my head around this eventually. Really looking forward to your write up.

  7. #7
    Advanced Tuner
    Join Date
    Nov 2007
    Posts
    232
    Looking forward to this information.
    "I didn't fail, I just found 100 ways to do it wrong." - Benjamin Franklin

  8. #8
    Tuner in Training
    Join Date
    Jul 2010
    Posts
    35
    This patent is a great read. Thanks for sharing, Eric.

  9. #9
    Advanced Tuner
    Join Date
    Feb 2017
    Location
    TX
    Posts
    761
    Was this write up ever posted?

  10. #10
    Potential Tuner
    Join Date
    Jun 2019
    Location
    Annapolis, MD
    Posts
    2
    Yes, was it? I?m very curious!

  11. #11
    Senior Tuner CCS86's Avatar
    Join Date
    Nov 2017
    Location
    Austin
    Posts
    1,089