Results 1 to 13 of 13

Thread: SRT 6.1 Hemi Car - Anyone with a stock file to share?

  1. #1
    Tuner in Training
    Join Date
    Nov 2013
    Location
    Ontario, Canada
    Posts
    14

    SRT 6.1 Hemi Car - Anyone with a stock file to share?

    Looking for a stock SRT file if anyone has pulled one yet and could possibly share. Checked the repository, only see a stock 5.7 truck file.
    Thanks!

  2. #2
    Tuner in Training
    Join Date
    Nov 2013
    Location
    Ontario, Canada
    Posts
    14
    Ok, no luck so far for a whole tune, ... how about just injector pw vs. mass tables, and perhaps manifold volume?
    Thanks

  3. #3
    i tried to pull mine but for some reason when it tells me to do the key cycle its not recognizing when i turn the ignition off and then back on so it just times out otherwise id be more than happy to share. its the stock pcm but i do have a custom tune on it via diablo intune....
    2002 Dodge Dakota 5.9 R/T reg cab
    Heads/Cam/Stall/Suspension/Tires/170stat
    365rwhp & 365ft-lbs
    1/4 mile: 12.4@110mph

    1998 Pontiac TransAm Ws6
    Heads/Cam/Stall/Suspension/Tires/160stat
    422rwhp & 400ft-lbs
    1/4 mile: 11.6@116mph

    2006 Chrysler 300c Srt8
    Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
    580rwhp & 490ft-lbs
    never drag raced

    2009 Dodge Viper
    Mopar Performance Race Exhaust & PCM

  4. #4
    Tuner in Training
    Join Date
    Nov 2013
    Location
    Ontario, Canada
    Posts
    14
    I had that happen a couple times as well with my Charger. Unplugging everything and starting over seemed to work, not sure what's happening to cause it.
    Also had a couple reads time-out near completion, pretty sure I heard the fuel pump cycle the last time???
    Last edited by CrucialVelocity; 06-04-2014 at 05:16 PM.

  5. #5
    Quote Originally Posted by CrucialVelocity View Post
    I had that happen a couple times as well with my Charger. Unplugging everything and starting over seemed to work, not sure what's happening to cause it.
    Also had a couple reads time-out near completion, pretty sure I heard the fuel pump cycle the last time???
    so u just unplugged the tuner from the car and the laptop and plugged it back in and it worked? do you start with the key in the on position and when it says "turn key off wait 3 seconds turn key on" do you wait exactly 3 seconds or a little more or less? sorry lol just trying to see what can make this work i feel like ive tried a lotta times and it wont do it.
    2002 Dodge Dakota 5.9 R/T reg cab
    Heads/Cam/Stall/Suspension/Tires/170stat
    365rwhp & 365ft-lbs
    1/4 mile: 12.4@110mph

    1998 Pontiac TransAm Ws6
    Heads/Cam/Stall/Suspension/Tires/160stat
    422rwhp & 400ft-lbs
    1/4 mile: 11.6@116mph

    2006 Chrysler 300c Srt8
    Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
    580rwhp & 490ft-lbs
    never drag raced

    2009 Dodge Viper
    Mopar Performance Race Exhaust & PCM

  6. #6
    Potential Tuner
    Join Date
    Jun 2012
    Location
    Big Easy
    Posts
    6
    06 SRT 6.1 stock values Intake manifold volume 12.5703

    Mass vs Pulse width
    Mg charge us
    1023.98 524280
    442.469 100000
    46.1563 10000
    9.7344 1728
    7.5469 1232
    6.2031 928
    5.2969 728
    4.7344 632
    4.1563 528
    3.4844 432
    3.0625 328
    2.625 232
    0.9375 128
    0.125 32
    0 0

    Voltage offset
    1011.97 65536
    15.7505 1080
    14.0056 1288
    11.9981 1608
    10.0062 2032
    7.9988 2960
    6.9951 3904
    6.0068 6920
    5.0031 12000
    Last edited by BlownHemi; 06-05-2014 at 10:11 PM.

  7. #7
    Tuner in Training
    Join Date
    Nov 2013
    Location
    Ontario, Canada
    Posts
    14
    Quote Originally Posted by Siciliano15 View Post
    so u just unplugged the tuner from the car and the laptop and plugged it back in and it worked? do you start with the key in the on position and when it says "turn key off wait 3 seconds turn key on" do you wait exactly 3 seconds or a little more or less? sorry lol just trying to see what can make this work i feel like ive tried a lotta times and it wont do it.
    Yes, unplugged from both, I might have restarted the software also. I'd say it was 3 seconds. I have no idea if this helped or was coincidence.

    Thanks also BlownHemi.

  8. #8
    thanks, guess ill keep trying
    2002 Dodge Dakota 5.9 R/T reg cab
    Heads/Cam/Stall/Suspension/Tires/170stat
    365rwhp & 365ft-lbs
    1/4 mile: 12.4@110mph

    1998 Pontiac TransAm Ws6
    Heads/Cam/Stall/Suspension/Tires/160stat
    422rwhp & 400ft-lbs
    1/4 mile: 11.6@116mph

    2006 Chrysler 300c Srt8
    Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
    580rwhp & 490ft-lbs
    never drag raced

    2009 Dodge Viper
    Mopar Performance Race Exhaust & PCM

  9. #9
    Tuner in Training
    Join Date
    Jun 2013
    Location
    NC
    Posts
    29
    bump, looking for 09 challenger, 6.1L, SRT, auto trans stock cal file. Trying to fix my buddies car, which has a butchered tune from a shop on it already, would like to start fresh. Can someone please help sourcing the stock cal file? TIA!

  10. #10
    I have a 2010 file but not stock. Not sure if that would help.

  11. #11
    Tuner Stevo's Avatar
    Join Date
    Mar 2011
    Location
    Melbourne
    Posts
    86
    I have a stock 2007 6.1 Australian 300c.

  12. #12
    Advanced Tuner
    Join Date
    Mar 2008
    Location
    Paris, France
    Posts
    435
    2011 Charger SRT8 attached
    Attached Files Attached Files
    http://www.lsxcalibration.com - Lsx Tuning France - Spécialisé Reprogrammation moteur Corvette Camaro Hummer, Ford Mustang et autres véhicules US

    Check our Facebook page http://www.facebook.com/lsxcalibration.com

  13. #13
    2009 SRT 6.1 auto. Not 100% sure if it's stock, but likely. Only bolt on is a CAI.
    Attached Files Attached Files