Looking for a stock SRT file if anyone has pulled one yet and could possibly share. Checked the repository, only see a stock 5.7 truck file.
Thanks!
Looking for a stock SRT file if anyone has pulled one yet and could possibly share. Checked the repository, only see a stock 5.7 truck file.
Thanks!
Ok, no luck so far for a whole tune, ... how about just injector pw vs. mass tables, and perhaps manifold volume?
Thanks
i tried to pull mine but for some reason when it tells me to do the key cycle its not recognizing when i turn the ignition off and then back on so it just times out otherwise id be more than happy to share. its the stock pcm but i do have a custom tune on it via diablo intune....
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
I had that happen a couple times as well with my Charger. Unplugging everything and starting over seemed to work, not sure what's happening to cause it.
Also had a couple reads time-out near completion, pretty sure I heard the fuel pump cycle the last time???
Last edited by CrucialVelocity; 06-04-2014 at 05:16 PM.
so u just unplugged the tuner from the car and the laptop and plugged it back in and it worked? do you start with the key in the on position and when it says "turn key off wait 3 seconds turn key on" do you wait exactly 3 seconds or a little more or less? sorry lol just trying to see what can make this work i feel like ive tried a lotta times and it wont do it.
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
06 SRT 6.1 stock values Intake manifold volume 12.5703
Mass vs Pulse width
Mg charge us
1023.98 524280
442.469 100000
46.1563 10000
9.7344 1728
7.5469 1232
6.2031 928
5.2969 728
4.7344 632
4.1563 528
3.4844 432
3.0625 328
2.625 232
0.9375 128
0.125 32
0 0
Voltage offset
1011.97 65536
15.7505 1080
14.0056 1288
11.9981 1608
10.0062 2032
7.9988 2960
6.9951 3904
6.0068 6920
5.0031 12000
Last edited by BlownHemi; 06-05-2014 at 10:11 PM.
thanks, guess ill keep trying
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
bump, looking for 09 challenger, 6.1L, SRT, auto trans stock cal file. Trying to fix my buddies car, which has a butchered tune from a shop on it already, would like to start fresh. Can someone please help sourcing the stock cal file? TIA!
I have a 2010 file but not stock. Not sure if that would help.
I have a stock 2007 6.1 Australian 300c.
2011 Charger SRT8 attached
http://www.lsxcalibration.com - Lsx Tuning France - Spécialisé Reprogrammation moteur Corvette Camaro Hummer, Ford Mustang et autres véhicules US
Check our Facebook page http://www.facebook.com/lsxcalibration.com
2009 SRT 6.1 auto. Not 100% sure if it's stock, but likely. Only bolt on is a CAI.