-
Tuner in Training
2005 Blazer zr2 manual transmission 5.3L
Okay guys I'm stumped again. I'm using 0411 Pcm from a 2002 avalanch. My problems are this.
When I press my clutch pedal in my spedo works, how ever if I release it, I've got nothing. So is there a setting for vss to change this or should I be looking at schematics to figure out why my vss is going through my clutch switch.
Secondly when I start up the truck or any time I press the clutch in my rpms jump up to around 3000 rpm for no reason. I have a NV3500 but can't seem to figure out why its jumping when the clutch is pressed.
Thank
Last edited by Blazer_Boy; 05-14-2014 at 11:22 AM.
Reason: spelling
-
Tuner in Training
This was posted via a cell phone and I did not see the transmission segment, please move to the appropriate section.