I have a 2011 Camaro w/a6 trans.. I have installed a texas speed vvt2 cam, specs are,lift .613in-620ex,[email protected],113 lsa. My car seems to run pretty well but as I am new to tuning I don't want to do anything to damage my car. I also deleted the AFM but kept the vvt. Car has a G5CR cai, kooks 1 7/8 lt and complete 3 in. exhaust w/cats. I installed 2.5 bar os and tuned car in sd. Everything was working pretty well, stft,afr,timing ,and idle. Also, my FTI 3000 triple disc stall converter was working and locking up well. Reentered Maf sensor and supporting mods back into tune and now converter won't lockup at any speed. Any ideas on why just reentering MAF info would keep converter from locking up? Can't figure out how to upload my tunes for you to look at.