Results 1 to 4 of 4

Thread: Need help..and where did the TCM recovery option go?

  1. #1
    Senior Tuner
    Join Date
    Jun 2007
    Posts
    1,100

    Need help..and where did the TCM recovery option go?

    This is for my 2007 TBSS.

    I did a few rounds of updating my tune after putting a new exhaust system on and got it pretty much dialed in except for a little KR. So I was working out the last bit of KR this morning and the third time I did a flash (write changes) the TCM flash errored with a message that the TCM communication failed. Now, I have experienced one TCM write failure way back about 5 years ago and that time HPT prompted me to do a TCM recovery reflash, which worked and I've not had any other issues doing writes until today. Of course, today when the TCM write failed HPT did not prompt for recovery and when I tried to flash, it gaves me an error message saying a tcm is required. I cannot do any flash on it now and it drives in limp mode with only reverse, manual second and third gear.

    So, did my TCM actually die during the flash or is there a way to recover it?

  2. #2
    Senior Tuner
    Join Date
    Jun 2007
    Posts
    1,100
    Here are the screenshot details
    Attached Images Attached Images

  3. #3
    Advanced Tuner caesar's Avatar
    Join Date
    May 2003
    Location
    Posts
    227
    Download the latest 2.24 version from your user panel and try again.

  4. #4
    Senior Tuner
    Join Date
    Jun 2007
    Posts
    1,100
    Thank you for posting that sir, the new version went directly into TCM Recovery and everything works now.