Results 1 to 3 of 3

Thread: LS1 Electric Fans

  1. 04-17-2014 #1
    ElectricxFusion
    ElectricxFusion is offline
    Potential Tuner
    Join Date
    Apr 2014
    Location
    Mechanicsburg, Pa
    Posts
    1

    LS1 Electric Fans

    I have a 2006 Trailblazer SS...I installed electric fans and put the wires in pins 36 and 56....I have a GM standard HP tuner...what do I need to do to get the fans to work
    Reply With Quote Reply With Quote
  2. 04-17-2014 #2
    will15
    will15 is offline
    Advanced Tuner
    Join Date
    Aug 2013
    Location
    australia
    Posts
    364
    You can use your scanner to turn on your fans (vcm control) to see if you have wired them right. Then you can adjust temp in the editor, it's under. system>fans.
    Reply With Quote Reply With Quote
  3. 05-29-2014 #3
    GreyFox
    GreyFox is offline
    Potential Tuner
    Join Date
    May 2014
    Posts
    4
    I have a serious noob question. I have an LS2 engine and ECM out of a 2006 GTO. Its been installed into a 1980 Malibu. I got a chassis harness from Street & Performance. While there is a pin with a wire in it in the connector going to 56, but there is nothing in the hole where the connector would go for 36. So, where do I get a pin connector for this, and how do I put it on? I understand how to crimp a wire, but how do I get the pin into the connector that clamps on to the ECM?
    Any help will be appreciated.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »