Hey everybody. I just was working with Bill (and my friend Clint) on getting boost to record/scan properly on HPT when going from 2.22 to 2.24.
The HELP file says to create a custom function of : [PID.11.IMP]-14.5
However, in actually, it NOW should be : [PID.11.PSI]-14.5
Hope this helps someone...and thanks as always for your help, Bill and Clint!
- Steve
2000 Pontiac Grand Prix GTX T/C
Current: T62-1, S1X, GMR goodies
Do you get it where it will only go to -11ish or so in the gauge and the histogram?
I mean it seems to read fine once above that and reads boost pretty spot on. Just sorta odd that it only goes that low, not sure if I am missing something.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Reply With Quote