Results 1 to 3 of 3

Thread: ECM37 VATS Disable ?

  1. #1
    Potential Tuner
    Join Date
    Jan 2014
    Posts
    6

    ECM37 VATS Disable ?

    Sorry to bother the forum, but I have not been to find the file to turn off the VATS in a ECM37. I would like to program it as the stand-alone controller for an LE5 engine. I've looked in the system folder, no luck. The OS folder doesn't seem to have any tabs for it either. Can it be done? If so, please tell me how. I should add that when I open the OS folder, it is completely blank. From what I have read, I was expecting to be able to access the VATS when the OS folder is opened. Everything else is normal. The ECM is unlocked, I can change the usual stuff and view diagnostic codes etc. I would appreciate any insight, thanks.
    Last edited by Dark Vark; 04-15-2014 at 01:46 PM.

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Its there under the OS folder, make sure you have your view set to advanced.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Potential Tuner
    Join Date
    Jan 2014
    Posts
    6
    Thank you, setting the view to advanced made all things better. Great tech support