Here is the stock file and the modified File for a 2014 5.0 M6
Rev Limiter was raised in the Rickifast file but still hits around 72-7300rpm. Let me know if Im missing something.
Thanks again guys and GREAT job on the hard work!
Here is the stock file and the modified File for a 2014 5.0 M6
Rev Limiter was raised in the Rickifast file but still hits around 72-7300rpm. Let me know if Im missing something.
Thanks again guys and GREAT job on the hard work!
Last edited by RickClarke23; 04-10-2014 at 01:04 PM.
I did in fact miss a limiter and I noticed this the other day myself, just forgot about it (lots going on ya know!).
There is a Driveshaft speed limiter and it is set for 7338 stock. So I just need to code it in and put it in all the definitions. I will do this first of next week and post an update when it is fixed.
Eric Brooks
HP Tuners, LLC
No worries thanks a bunch Eric!
Just wanted to give you a heads up so you know I haven't forgotten you on this. I am adding a few parameters in today, and this is one of them.
Eric Brooks
HP Tuners, LLC
Not a problem thank you for letting me know!
It has been added, in the Transmission>Limits section
Eric Brooks
HP Tuners, LLC