Results 1 to 2 of 2

Thread: 1995 c5 dies sometimes when coming to a stop

  1. #1
    Tuner in Training
    Join Date
    Dec 2013
    Posts
    11

    1995 c5 dies sometimes when coming to a stop

    ok this is a heads and cam c5. it was a six speed but I just changed it to a auto. this didn't happen when it was a manual. I am still in the process of tuning it in speed density. the very last frames of the log are when it died. i am not sure what to look at, nothing is jumping out at me when it dies but i imagine it is in the tune just because it didn't do this as a manual. if i put it in neutral or tap the gas it will catch and not die. it does not always do this, it seems there is no pattern as to when it will happen.

    stock bottom end ls1
    244/242 cam
    cnc 799 heads
    yank 3600 converter

    I am new to tuning so a little help would be appreciated.
    Attached Files Attached Files

  2. #2
    Tuner in Training
    Join Date
    Dec 2013
    Posts
    11
    i just thought about it, i used the russ k idle tuning when it was a manual, so i am going to run that again with the car in gear. when i swapped it over to an auto i just copied the neutral over to the in gear. i will give that a shot. meanwhile if you see anything else i need to look at let me know